Hangers

3x1 for Cable or Track

The 3x1 Suspension System uses hangers that attach to tension cable at 12 o’clock, D-Clasps connect duct at 10 & 2 to each hanger end, and Gliders connect to cable between hangers. By requiring only a single cable, the 3x1 Suspension System reduces the number of knee brackets with elbows, Ts, or transitions, reducing material and labor costs. It can also be used with our Suspended U-Track connecting the hanger to the track with a J-hook. 8" - 48" diameter (203mm - 1,219mm)

 

 

 

 

 

 

 

 

 

 

4x2 for Cable or Track

The 4x2 Suspension System is similar to the 3x1 Suspension System, however, made for larger diameters. The 4x2 hangers attach to tension cable at 11 & 1 o’clock. The 4x2 Suspension System can also be used with our Suspended U-Track connecting the hanger to the track with a J-hook. 50" - 60" diameter (1,270mm - 1,524mm)
 
 

 

 

 

SUMMARY

Reduced deflation
Simple installation with Track or Cable
External hanger supports easily detached for maintenance

   
3x1 8" - 48" diameter (203mm - 1,219mm)
  1 Row Track or Cable at 12 o’clock
  Fabric connection points at 10, 12 & 2 o’clock
  17% Deflation
  Minor inflation noise
  Noticeable fabric motion at start-up
   
4x2 50" - 60" diameter (1,270mm - 1,524mm)
  2 Row Track or Cable at 11 & 1 o’clock
  Fabric connection points at 10, 11, 1 & 2 o’clock
  12% deflation
  Minor inflation noise
  Noticeable fabric motion at start-up